Ask Experts Questions for FREE Help !
Ask
    rickthompson's Avatar
    rickthompson Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 24, 2006, 08:20 AM
    Ceiling Fan motor still noisey
    Help... I think I have ruled out the fan motor itself... Could it be something in how the outlet box is wired, or something else on the circuit? I am really baffled and am tired of taking down and putting up the fan every time I need to check something out. I have measured the voltage at both the switch and the ceiling box... 124V steady. The wall switches for both the light and the fan are single pole. There are no other switches except the pull switches for the fan and the light light kit. The are no dimmers or specialty switches. The wiring is 12/3. The common neutral is looped from one switch to the other, with the red wire attached to one switch and the black to the other. In addition to the 12/3wire from the wall switches, the are 2 additional white an one black all pig-tailed together in the ceiling box. That bundle is hot, as I get 124V when I test between the bunde and the White to the fan/light..

    The fan and light kit are Hampton Bay Antiqua. The original fan ( no manufacturer name on the fan, just a phone number to Lowe's Customer Service) that was on the ceiling did not make any sound or humming at all, But the three that I have subsequently put up all hum!

    Posted below is my original posting of October 13.


    Ceiling fan with light kit on separate switches…. Fan motor makes humming noise!
    Original question posted on October 13, 2006
    --------------------------------------------------------------------------------

    I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new fan/light, everything seemed to be working, but the fan motor made a humming noise that wavered in pitch slightly. This fan worked for about 2 weeks, making the noise, but then we smelled a faint electrical fire smell coming from the fan. I replaced that fan with one just like it, thinking that the motor was defective. After I installed the second fan, it too made the same humming sound. We ran that fan for about a week, and then the fan suddenly stopped working. Alas, I took that fan back, thinking it was another defective fan. I bought a third fan/light (different brand) and it too makes the same humming sound. Sounds like I might have a wiring problem, but I don’t have any shorts or arcing. Any thoughts as to what might be the problem? It has been suggested to me that the problem might be in the wall switch itself. Something about low voltage
    Sentra's Avatar
    Sentra Posts: 385, Reputation: 55
    Full Member
     
    #2

    Oct 24, 2006, 09:12 AM
    Is the wiring in your house up to date? I had a similar problem; our house is fairly on the old side, and perhaps as with ours the wiring/power isn't strong enough to handle modern conveniences. Hope this helps! :)
    rickthompson's Avatar
    rickthompson Posts: 3, Reputation: 1
    New Member
     
    #3

    Oct 24, 2006, 10:08 AM
    Quote Originally Posted by Sentra
    Is the wiring in your house up to date? I had a similiar problem; our house is fairly on the old side, and perhaps as with ours the wiring/power isn't strong enough to handle modern conveniences. Hope this helps!!:)

    Answer... The house is only 5 years old and the wiring is up to code!?

    Could it be that the noise is being generated due to vibration between the fan and the mounting brackek or the mounting bracket to the ceiling box?:confused:
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    Oct 24, 2006, 11:17 AM
    If it's a hum, it sounds like vibration being transferred from the motor to the ceiling. Some cheap fans, especially mounted cloe mount, have this problem. You can try to isolate th vibration, see:

    http://www.ceiling-fans-n-more.com/c...-and-FAQ.php#6
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #5

    Oct 24, 2006, 11:18 AM
    I'll add, for Sentra, 120vAC is 120vAC, and having old wiring shouldn't make your fan noisy. If you're not using an improper control of some time, noise comes from the fan itself.
    Sentra's Avatar
    Sentra Posts: 385, Reputation: 55
    Full Member
     
    #6

    Oct 24, 2006, 02:28 PM
    Quote Originally Posted by ceilingfanrepair
    I'll add, for Sentra, 120vAC is 120vAC, and having old wiring shouldnt make your fan noisy. If you're not using an improper control of some time, noise comes from the fan itself.

    You know, thanks I will check into that! :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dual motor ceiling fans [ 1 Answers ]

What is the advantage of having a ceiling fan which has dual motor where ( for instance say 4 blades) 2 blades go one way and the other 2 blades go the other way? Hampton Bay Lighting has one and I am trying to find is it more energy effeicient.

Ceiling fan with light kit on separate switches [ 1 Answers ]

I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...

Ceiling Fan - Motor Start Capacitor [ 2 Answers ]

I have a Hampton Bay ceiling fan whose motor fails to self-start. The fan has three speeds. All three speeds work fine if I hand spin the blades, starting at low speed of course. The fan has a remote unit. Once I hand start the fan the remote allows me to change speeds up and down and turn off the...

Corrosion on a ceiling fan motor [ 1 Answers ]

My fan powers up but does not spin. After taking the fan apart I saw that there was corrosion on a couple of coils and 2 wires are split. It looks as if the wires shorted out and flash burned a small part of the motor coils, along with the wires. Can this motor be fixed and/or made to work...

Ceiling Fan Motor Noise [ 1 Answers ]

I have installed 4 ceiling fans (2 Hampton Bay and 2 Hunter) and experienced the same thing. A humming sound from the motors on all of them. I used 12G wiring and spliced into 12G existing wiring in the attic. The mfrs don't understand why - one has asked if I have enough power going to them. ...


View more questions Search