Ask Experts Questions for FREE Help !
Ask
    suprateacher's Avatar
    suprateacher Posts: 6, Reputation: 1
    New Member
     
    #1

    Jul 15, 2009, 11:25 AM
    2005 Chevy Blazer 4wd
    I have a 2005 Chevy Blazer 4 WD, 5 speed manual transmission... there are noises that sound "like metal that is being stressed" coming from the rear driveshaft. I looked at the driveshaft and turned it under my own power and I could hear the same noise.
    To be specific, the noise I hear is more prominent when I am just taking off in 1st and 2nd gear (under the most torque I guess is the best way to describe it).

    When I am in reverse I not only hear the stress noise but also a whining as each revolution of the driveshaft goes by. If I take it out of gear and let it coast in reverse the whining noise goes away.

    Any idea what this is and what I need to do to fix it?

    Thanks.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jul 15, 2009, 11:53 AM

    . Check for an intermediate driveshaft bearing/mount--the bearing may be shot.

    . Check the gear oil in the differential--it may be low or it may need to be drained and replaced.

    . Check universal joints--they may need replacing. Ensure mounting bracket bolts are tight.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1992 chevy s10 blazer [ 2 Answers ]

Where is the fuel pressure regulator on a 1992 s10 blazer, mine is running rough and the smell of fuel is very extreme, si suspect the diaphragm has gone bad and raw gas is leaking into the manifold but don't know where to find it.

Ac compressor clutch on 03 chevy blazer [ 1 Answers ]

I have a bad AC compressor clutch on my 03 chevy blazer. I need to know what size deep well do I need to remove the bolt holding the pulley... can't see it and I have no idea what size it is, and is there anything else that I need to know to remove the pulley

My 1995 chevy blazer won't start [ 2 Answers ]

I have an old one, a 1995 chevy blazer. It stopped one day and I have been able to get it start since. We changed fuel fliter, spider injector pump, and fuel pump in the tank. I checked to see if fuel relays are working and they are. The pump in the tank is working, while changing the filter we...

1987 chevy blazer S-10 [ 1 Answers ]

I'm trying to figure out how to remove the steering wheel so I can out in a new ignition switch.

Registration for '99 Chevy Blazer? [ 1 Answers ]

Anyone have an estimate of how much it would cost to register my '99 Blazer? Thank you! :D


View more questions Search