Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower on cement floor
[ 5 Answers ]
I want to add a shower to our basement, the plumbing is not there. How do I put the shower plumbing in? Do I have to cut into the main pipe for the shower? Do I have to cut into the cement, or can the plumbing be installed above the cement? Thanks
Repairing and painting Block Foundations
[ 2 Answers ]
Power washing my block foundation to remove old peeling, flaking paint has left pock marks and some loss of mortar in joints. How do I repair and then what type of primer paint should I use? (Don't know what the original paint was-oil based or latex). I'd appreciate your help. Thanks.
Painting on a cement wall
[ 1 Answers ]
I'm an artist with a job to do a painting on an exterior cement wall and I want to make sure I use the right paint. It was previously painted and is in decent shape. I could use cement paint, but it doesn't come in all the colors I need. Can I use cement paint for the first coat, and then...
Drain for shower on cement slab
[ 6 Answers ]
I am replacing a shower that was installed on a cement slab. I will probably be using noble company products for the liner etc.. However I need some guidance on the install of drain system. Attached are some pictures of the existing situation... can anyone help suggest something. On some other...
Glass Block Shower
[ 2 Answers ]
I am going to install a glass block shower in my bathroom. I am going to (hopefully) attach the Door directly to the glass block. My understanding is that I put anchors in the morter joints to hold the door. My question is about finishing. How would I finish the block around the door? It... View more questions Search
|