Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Electrical and lighting
[ 2 Answers ]
I have a building with 32 floursent lights installed it is being served by two 20 amp circuits with 16 lights on each circuit, but only have one neutral, the lights are four foot ,two lamps each lamps are 32 watt t8 lamps, my problem I am having is I have an exiseve amount of ballast and lamps...
Electrical calculation
[ 6 Answers ]
What is the load center length?130ft at 40a, 100ft at 200a, 80ft at 200a; and what is the total load?
Electrical service calculation
[ 3 Answers ]
I have seen that some of the helpful moderators and members can run calculations to determine what size (how many amps) electrical service is called for. I am changing the service on my home and need to decide whether I go with 100amp, 125amp, 150amp, or 200amp service (I think that is how the...
Electrical and lighting
[ 1 Answers ]
How do I replace a GFI switch in the bathroom?
Electrical lighting
[ 1 Answers ]
Hello I put a low wattage light into a porch light which is on a 2 way switch. Every 5 seconds the bulb flickered when the light was switched off Does anyone have any idease why this might be happening Thank you View more questions Search
|