Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Husqvarna YTH2448 engine stalls when blades engaged
[ 5 Answers ]
Good afternoon all, I have a quick question that I am hoping someone can help me with. I have a Husqvarna yth 2448 that stalls when the engine is engaged after running for about 30 minutes. After the mower sits and cools off, it will cut fine again. I checked the seat sensor, not sure if that...
Engine stalls when engaging blade
[ 2 Answers ]
Hi, I have a Murray Model 40542C 40" riding lawn mower. I recently took the blades off to have them sharpened, and since putting them back on, there is a lot of vibration (some times, not always) when I engage the blades, and some times it even stalls the engine. It runs fine without the blades...
Engine stalls out on 03 Blazer
[ 1 Answers ]
I have an 2003 chevy blazer. Out of the blue it will begin to stall out when I come to a stop Or I let the rpms go below 1000. Iwill have to put it in neutral and rev the engine to keep it running. Maybe it is a coincident but it seems to happen when I go below a quarter tank of gas. After I made...
Engine stalls
[ 1 Answers ]
Engine stalls after minutes from starting to mow also drops of gas are coming from cap below carb and fuel filter line help please
1989 accord stalls when engine warms up
[ 3 Answers ]
I just bought a 1989 Accord and the first day it ran fine. Now it idles well when cold, but as soon as the engine warms up and you take your foot off the gas, (when slowing down), it stalls. Our local garage charged me $180 but could not fix the problem. We've now increased the revs, but the engine... View more questions Search
|