Ask Experts Questions for FREE Help !
Ask
    shortcircuit's Avatar
    shortcircuit Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 13, 2009, 07:58 AM
    Moving load bearing post in basement
    We are wanting to remodel the basement and have 3 posts running the width of the basement. Is it possible to move the middle post 2.5 to 3 foot over so the room does not have to have this one beam in it, it would be on the other side of the newly built wall. If it is possible, is this something that can be done by the homeowner or is it something that should be left to a professional.

    shortcircuit
    Bljack's Avatar
    Bljack Posts: 245, Reputation: 28
    Full Member
     
    #2

    Jul 13, 2009, 12:49 PM
    Yes, it could be done and depending upon how experience you are, or how confident you are in being able to complete the job will determine if you could do it yourself or if you would need to hire it out. The first thing you will need to do is have an engineer or architect determine what changes would need to be made to the beam being supported by the posts. Next, calculations would need to be made to determine if the next closest beam not being moved can carry the additional load that will be placed upon it once it becomes part of the supporting structure for a longer span. Once those things are figured out, and a permit is obtained, you will break through the slab, dig a hole for a new footer for the relocated post, get an inspection of the hole, build the footer per the engineers design, install the new post, fix the slab. Somewhere along the way, you will also need to make any changes to the beam and the post that is now carrying part of the longer span, and once all those things are done, then you will be able to remove the post that's in the way of your desired floor plan.

    If you are lucky, you'll only need a new footer and post, then remove the old one, but you'd need the technical drawings stamped by the arch or eng. To proceed.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Jul 13, 2009, 03:33 PM

    Hi shortcircuit

    Posting the same question in 2 forums makes it hard to get an answer.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moving load bearing post in basement [ 1 Answers ]

We are wanting to remodel the basement and have 3 posts running the width of the basement. Is it possible to move the middle post 2.5 to 3 foot over so the room does not have to have this one beam in it, it would be on the other side of the newly built wall. If it's possible, is this something...

Do I have load bearing walls? [ 5 Answers ]

I live in a small house. The lot is 80 x 20 and it is attached on both sides to other houses. It has a poured concrete and cinder block basement and plaster and lathe 1st and 2nd floors. There are no walls that run the length or width in the interior of my house and no walls that are directly above...

Load bearing walls [ 4 Answers ]

I have a 29 foot load bearing wall. I am going to leave 4 ft. then tear down a 7ft section and then will have 18 ft still standing. Will the wall still stand or do I need to support it somehow? Thanks for taking the time to help out.

Load Bearing Wall? [ 1 Answers ]

How can you determine whether a wall is load bearing?:confused:

Removal of Load Bearing basement wall [ 2 Answers ]

Looking to remove a wall that spans 21' in the basement and need to know what type of leader(metal or wood & size) is best and can I do this with on one post at each end? Glenn


View more questions Search