Ask Experts Questions for FREE Help !
Ask
    pullthoseup's Avatar
    pullthoseup Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2009, 09:02 AM
    No power at ignition.
    I have replaced the stater and solenoid on my huskee riding mower. I still have no power at the ignition, even while jumping the battery. What could it be?
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #2

    Jul 13, 2009, 12:58 AM

    A few things could be a problem.

    Check safety switch under seat. ( grounding is the culprit there. Jump switch tp by pass and try starting. Make sure mower is in neutral/ brake on/set clutch depressed.

    The ignition switch could be bad. To check find the feed wire from battery to ignition switch and check for power at back of switch. If not check battery terminals. If so then turn Key check wire from ignition to solenoid. Also check for any in line fuse you could have there

    This is pretty much the basic wiring here. It is possible to get a bad solenoid. Try a screw driver and jump the posts to see if there is any change there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2005 Chevy Tahoe Passenger Power Windows and Both Power Seats not Working [ 3 Answers ]

I have a 2005 Chevy Tahoe. The passenger side windows stopped working and both passenger and driver power seats stopped working. All of this happened at the same time. I saw this same problem posted by another user back in January but I didn't see a clear answer. Does anybody know how to fix...

Car won't start, no click and no power to radio, power window or locks [ 6 Answers ]

After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...

Energy, power latent heat - data analysis - power storage systems [ 33 Answers ]

1. One possible design for a storage power station is to use off-peak energy to compress air into a sealed underground canve and then, during periods of high demand, to reverse the system so that the air can drive a generator. one system of this type compresses air from the atmospheric pressure...

92-92 civic no power to the fuel pump and no power or spark to the distributor [ 9 Answers ]

Hello, I have a 92-95 civic si. I am not getting any power to the fuel pump and no spark to the distributor. I have check all my sensors and have replaced the distributor. Checked the continuity to the distributor and all checks out good. I also have checked all grounds and all checked out all so....

View more questions Search