Ask Experts Questions for FREE Help !
Ask
    mattbreck's Avatar
    mattbreck Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 9, 2009, 03:15 AM
    Angle of equilibrant
    A body is acted upon by a force A of 31 Newtons directed North and also by a force B of 20 Newtons at the same point directed East. What force R in Newtons must be applied to the body to produce equilibrium?

    Let the angle of force producing equilibrium be in decimal degrees measured anticlockwise from the east.

    1) Find the Equilibrant in Newtons
    2) Angle of Equlilbrant in decimal degrees

    For number 1, I came up with 36.891N
    For number 2, I came up with 49.822 decimal degrees

    Is this correct?
    Thank you
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    Jul 9, 2009, 03:40 AM

    For #1, I get the same thing, but I rounded it off to 36.892N (36.8917).

    For #2, I get 57.171 degrees from the east. Note that the angle is measured anticlockwise from the east. So, east is 0 degrees. If R is the resultant vector with magnitude 36.892 N and θ is the angle that it makes with the zero degrees (the horizontal on a Cartesian coordinate system),







    You can also verify that

    Unknown008's Avatar
    Unknown008 Posts: 8,076, Reputation: 723
    Uber Member
     
    #3

    Jul 9, 2009, 10:17 AM

    I would like to point out that it is preferable to work with the values that you were given, that is the 31 N and 20 N. The reason for this is to reduce the possibility of an 'error carried forward'. Say you wrongly pressed the buttons on your calculator and you were not aware of it, then passed on to the next part. If you used the value you just got, you are bound to include a mistake, making your answer to the second part wrong. That's why, here, you'd prefer to use the tan inverse of 31/20, giving 57.1714 = 57.2 degrees.

    For the first part, give your answer to 2 significant figures, for the highest significant figure is 2 in the whole question. For angles, one decimal place is generally required.
    mattbreck's Avatar
    mattbreck Posts: 3, Reputation: 1
    New Member
     
    #4

    Jul 9, 2009, 06:59 PM

    Thanks for your help, guys. I really appreciate it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Zero Launch Angle [ 1 Answers ]

A diver runs horizontally off the end of a diving board with an initial speed of 1.75m/s. If the diving board is 3m above the water, what is the diver's speed just before he enters the water? When I worked out this problem, I came up with an answer of 7.67m/s. The answer at the back of the...

Tan B= 0.1, what is angle B? [ 2 Answers ]

So I am starting a new section. I don't really get this tan stuff but here is the situation There is a example. Example: tan A=0.25 Answer: Angle A=14.036 degrees If I type in solve(tan(x)=0.25,x) into my calculator, it just comes up with a lot of random numbers. But...

Projectile angle [ 1 Answers ]

a particle is thrown over a triangle from one end of a horizontal base and gauging the vertex falls on other end of the base .if a and b are base angles and c the angle of projection, prove that tan c = tan a + tan b

Angle of elevation [ 5 Answers ]

If I know the angle of elevation of an object is 58 degrees at 50 feet from the object, is there any simple way of calculating what the angle of elevation would be 11 feet below the observation point at the same distance (50 feet) from the object ? Any help would be appreciated. Flashman2

Projectile - what angle? [ 15 Answers ]

Hello All, I have a question on projectiles, but I am unsure what formula I need to use to calculate the required angle. A projectile leaves the nozzle at 14 m/s, at what angle should the nozzle be so that it hits the nearest edge at the top of a wall 0.7m high with a horizontal distance oy...


View more questions Search