Ask Experts Questions for FREE Help !
Ask
    lassenza's Avatar
    lassenza Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 8, 2009, 09:57 AM
    How do I connect my Panasonic DVD recorder to my Dish Network DVR receiver?
    I recently got Dish Network service and would like to connect my Panasonic DVD recorder to either the TV or the satellite receiver so that I can transfer programs recorded on the DVR to DVD.

    Here is what I have in terms of equipment:

    VIP722K DVR satellite receiver
    Panasonic DMR-ES15 DVD recorder
    Sylvania 6626LCT LCD/HDTV television

    Here is what I have in terms of cables:
    Component RGB (supplied with the satellite receiver)
    RYW RCA cables (2 sets)
    S Video (2)
    Coaxial (1)

    Would appreciate any help anyone can give.:)
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    Jul 9, 2009, 03:21 AM

    The Panasonic recorder has the following inputs:

    (from http://www.110220volts.com/DMR-ES15.html)
    "3 sets of A/V inputs (composite and S-video), including 1 front-panel set"

    The television has audio output, but the manual doesn't show any video outputs (I would be surprised if it did)

    Sylvania 6626LCT Television - Owner's Manual

    The Satellite receiver has a Component Video output (six RCA jacks) that you probably have connected to the television, and a set of three Composite Video jacks (labeled with a white "2" in a blue background).

    Dish Network VIP722K DVR Receiver

    I think you'll have to connect the composite video from the recorder to the satellite receiver using one of your RYW RCA cables. I don't see any other possible connections. I'm not sure how the tuning will work. I expect you'll only be able to record the program that is selected on the receiver.
    lassenza's Avatar
    lassenza Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 9, 2009, 10:50 AM

    Thanks for responding. I did connect the receiver to the recorder using RCA then connected the recorder to the TV using RCA and it works fine. Thanks again.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Best way to connect Dish HD Receiver, Panasonic DVD/VCR Recorder to LG HDTV [ 1 Answers ]

I am looking for the best quality (audio and video) in connecting a Dish Network HD Receiver (with HDMI out, component out and SD out), Panasonic DVD/VCR recorder (with component, SDout, and HDMI out) to an LG HDTV with 2 HDMI inputs, component inputs, and of course all have the coaxial cable...

How to connect DVD player directly to Dish Network DVR receiver [ 1 Answers ]

I have an older TV for my kids that has a Dish Network receiver attached and operational. I just picked up a DVD player and I also have a RF modulator. I've tried every combination of connection to and through this thing that I can think of... with no results. I am at my wits end(my lovely...

How to connect DVD player directly to Dish Network DVR receiver [ 1 Answers ]

Hello. I just got a new DVD player and I need some help connecting it. I already had my TV connected to a Dish Network DVR receiver. My TV is older and only has one cable connection on the back of it, which the Dish Network receiver is connected to. When I got my DVD player, I was under the...


View more questions Search