Ask Experts Questions for FREE Help !
Ask
    atrent's Avatar
    atrent Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2009, 11:41 AM
    I want to start a eletrical remodeling business in GA
    My husband has 28 years experience in the electrical business, but is not licensed. Can he start a electrical remodeling business in the state of GA.. Only small jobs, changing out fixture and fans etc.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 7, 2009, 12:28 PM

    I thought you should be a Master.
    There are only a couple of Licensed Masters in My area, some "Hore Out" their License, and qualify people not capable. I repair much of this and I see scary stuff by "Liscensed Contractors". They even have a sticker that says don't hire unlicensed Contractors.
    You should hire a Licensed contractor. Ask neighbors or co workers of a good electrician.
    I am Licensed and a Master.
    Good Luck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Where do I start looking for grants to start up construction business in Mn. [ 3 Answers ]

Hello,I am John and I would appreciate any help I could get on finding some grants or low interest loans for starting a concrete contracting business.I have searched some sites but most want money for a kit.My credit is not very good and I am just trying to start a small construction business.I am...

Iwish to start a business but I don't have strong finincial baground for business [ 5 Answers ]

I am willing to start a business but I don't have strong baground of business famally or good finiancial support so what kind of business I do need to start I am mba(marketing) post graduate with 4 year of experience and currently working as a erp cunsultant but becase of recesssion my salary is...

No Power In Eletrical Sockets [ 2 Answers ]

I have 2 pairs of sockets in my bath room (not GFCI) and there is no power in both of them. Another socket in adjacent room also has no power. Think all the 3 are connected. I checked the circuit breaker and that is fine. Was wondering reason for no power? Appreciate a quick anwer

Eletrical [ 4 Answers ]

I have a 97 dodge 2500 pick up cummins diesel all the lights on the dash come on and the truck comes out of overdrive I changed the pcm and the ignition switch can anyone help me with what else could be the problem thank you

Upgrade eletrical service [ 1 Answers ]

I'm putting in a new service 60 amp with 200 amp. I have meter box steel 2" riser and weather head.can I use pvc conduit out of bottom of meter box 2ft and then into house over to new 200 amp breaker panel? I'm told 02 wire is the correct size? Because of the pvc do I need to run a ground wire from...

View more questions Search