Ask Experts Questions for FREE Help !
Ask
    whirlpool's Avatar
    whirlpool Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2006, 01:50 PM
    Whirlpool Rough-in-Valves
    Are whirlpool rough-in-valves universal or are they specific to manufacture like a shower rough-in-valve? I would like to change out the trim on our whirlpool. We currently have a Kohler faucet and valve and would like to change the trim to a Delta faucet. Should I be able to just take the Kohler trim off and replace it with the new Delta trim or do all the internal parts, including the valve, need to be replaced as well?
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
    		  
    #2

    Oct 20, 2006, 02:17 PM
    You will need to replace all of the parts.

    If you are trying to just change the 'look' of the bathroom, there may be Kohler trim that closely matches the look you are going for that is compatible with the present rough-in valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Hose Valves [ 10 Answers ]

There are two 20 year old hose valves outside the house. Both leak, and one even has a busted handle that requires a vise grip every time we want to open and close the water flow. I would like to replace both without the expense of hiring a plumber. I think this is a job that even I can do.. ....

Plumbing Valves? [ 6 Answers ]

I'm in the process of building a home and the builder ask me to pick out showerheads and faucets. I started to see that the showerheads says Transfer valve and/or thermostatic valve and/or volume valve was used. I'm not sure what these are and if I need them or not. Can someone please explain?...

Zone valves [ 2 Answers ]

Looking for a wiring diagram for a new dunkirk boiler . Just the diagram for the 3 zone valves. Company says that the boiler transformer is enough to run three zones ( 24v) . Or do I need to add transformer. Just can't figure out the wiring from one zone valve to another. Contacts on each zone are...

Access to shut off valves [ 1 Answers ]

Does anyone know if there is a code in sarasota fl that says you must have access to shut off valves in your tubs and if so what is that code and where can I get a copy. Thank you[ Manny

Leaky Shut off valves [ 3 Answers ]

Hi, I live in the Northeast and for the first time this past winter, I actually used the shutoff valves that lead to my outside water spigots. Now that I've turned them back on, they are leaking whenever the water line is open. I noticed they have nuts on the front... was I supposed to...

View more questions Search