Ask Experts Questions for FREE Help !
Ask
    RDele's Avatar
    RDele Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2009, 12:29 PM
    How do you remove brass seat in 12 HP B&S carb?
    Hello all. I have a briggs & stratton 12 HP engine 281707-0137-01. I am rebuilding the carburetor.
    I will be replacing the seat in the carb. Not sure the correct method of removing the seat. Can anyone direct me so I don't ruin the carb? Thanks in advance.
    RDele's Avatar
    RDele Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jul 8, 2009, 05:46 AM
    Quote Originally Posted by RDele View Post
    Hello all. I have a briggs & stratton 12 HP engine 281707-0137-01. I am rebuilding the carburetor.
    I will be replacing the seat in the carb. Not sure the correct method of removing the seat. Can anyone direct me so I don't ruin the carb? Thanks in advance.
    Doesn't anyone have any idea?
    I need help, soon!

    Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Jul 8, 2009, 04:12 PM

    Hi,
    The manual directs you to use one of the thread-cutting screws from the smallest Briggs flywheel puller; the on used on walk-behind mower engines. You can use the old seat and screw with a vise to carefully press in the new one.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove cast iron/possibly brass plug from cleanout drain in bathroom? [ 9 Answers ]

My bathroom sink is plugged solid. I tried to use snake under sink but can't seem to get it in very far. There is an old corroded clean out sticking out of the wall behind the toilet so I removed the toilet to get at it but it doesn't budge. It has a square nut on the top of what looks to be a...

Brass Shower Stem Not able to remove [ 2 Answers ]

Hi Everyone, I have a leaky tub/shower faucet. I'm trying to replace the washers/orings, but I can't seem to get the inner brass stem bonnet nut off. I've bought the 5 piece stem socket tools, but none seem to fit. One comes close to fitting, but when I try to get leverage on it, it slips....

How do I replace a needle valve seat on a BS14 carb? [ 14 Answers ]

I have BS 14 HP with a float type carb. I know the needle is sticking and flooding the engine/ oil/ ground with gas! I have ordered the new needle valve and seat. My question is how do I get the seat out? Does anyone have any information about how to remove one? Help please... Mower parked in front...

Add/Remove Programs doesn't have REMOVE option [ 4 Answers ]

In Control Panel | Add/Remove Programs on Windows XP Home, some of the programs do not have the REMOVE button below them. WHY not? How do I remove programs from the Add or Remove Function, when it displays the program, but when I highlight it, it doesn't give the option to REMOVE it?

View more questions Search