Ask Experts Questions for FREE Help !
Ask
    nirs00's Avatar
    nirs00 Posts: 27, Reputation: 1
    New Member
    		  
    #1

    Jul 2, 2009, 02:33 PM
    Maytag Top Load Washer
    I have a Maytag Top Load Washer. Model MAV208DAWW. When the washer starts to spin,
    The tub will hit the sides of the cabinet. This is a belt drive washer. Also the motor is loose and the support bolts can not be tightened.


    Please advise,

    Thanks
    stuartn's Avatar
    stuartn Posts: 85, Reputation: 2
    Junior Member
    		  
    #2

    Jul 4, 2009, 08:34 AM

    The motor is suppose to be loose and able to slide. I am assuming that this is not a loading problem. Is the tub always tilted toward one side and not centered?
    nirs00's Avatar
    nirs00 Posts: 27, Reputation: 1
    New Member
    		  
    #3

    Jul 4, 2009, 10:26 AM

    Maytag belt driven washer. MAV208DAWW. The tub is centered but leaks oil from the bottom pulley
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Maytag Top load Washer has issues [ 2 Answers ]

Hi all. I have a Maytag top load washer model #MAV7057AWW. Problem: All works fine until the spin cycle. When it is time to spin, the tub rotates slowly and water also pumps slowly. Also get an oder of burning rubber but the belt seems OK other than black residue on the motor pully only. The...

Maytag Top Load "Walking" Washer [ 2 Answers ]

Hi, We have a Maytag Performa top load wash about 4 yrs old Model PAV2300AWW that wants to walk out of the house even with very light loads. Have looked but nothing seems obviously wrong but surfing the internet suggests that this might be a common problem. Intend to approach Maytag for a free...

Maytag washer top load [ 1 Answers ]

Oil or grease stain on clothes when washing clothes

View more questions Search