 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi, You did not give a model number, or a clue to the age; but look for a feature similar to the picture beneath and on both sides of the seat. Remember to put 10psi in tires first. You can measure from the bottome edge of the deck to a flat surface. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 42" Murray rider and can not seem to keep the mowing deck level. Every time I mow it's a gamble as to how the grass will look when finished. Can anyone give me some pointers? I work hard to keep my lawn looking good only to have the mower mess it up!
I need to raise the mower deck of my Snapper rear engine rider. It has a single blade with 30-inch cutting width. Currently, when lever is in upper-most position (#6) the blade still scalps portions of my lawn. I have looked through some online manuals but they are a bit confusing. Help...
I'm trying to put a deck belt on a 42" MTD, 14.5 hp. All the numbers on the labels are worn off so I cannot get an owners manual or schematic. We have dropped the deck down and have gotten the belt on 2 pulleys, (there are 3) but it appears short and will not go on the other pulley. I took the...
Just tuned up the old snapper for the summer.Changed the oil and spark plug,new blades, new battery patched up a rust spot and replaced the starter. This thing has never run better until I ran over a large runner that we put on the deck, my bad. The mower stopped running as soon as it picked up the...
View more questions Search
|
