Valve adjustment-15hp I/c briggs&stratton

palehorse Posts: 1, Reputation: 1

New Member

Jun 30, 2009, 01:06 PM

Valve adjustment-15hp I/c briggs&stratton

What are the valve adjustment specs on a 15hp I/c briggs& stratton with ohv?
Thanks

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Jun 30, 2009, 07:31 PM

Hi,
They are 0.004 - 0.006" and I use a "snug" fit on the first.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

Briggs and stratton valve adjustment [ 3 Answers ]

Can any one tell me what the valve adjuctment is on a 17 hp briggs and straton single cylinder engine is

Valve adjustment on 14.5HP Briggs and Stratton engine [ 3 Answers ]

I'm having starting issues with my MTD riding mower with the single cylinder Briggs and Stratton 14.5 OHV engine. It appears I need to adjust the valves. I have a round metal feeler gauge, but have never done this before. Can someone give me a step-by-step procedure for this task, in very simple...

Valve Adjustment on Briggs and Stratton 18hp [ 3 Answers ]

When trying to start the mower, it acts as though there is too much compression. Once I click the started 4 to 5 times and it makes about a half rotation it will then take off. A friend mentioned to me that the valves may need adjusted. Is this something that I can do or should it be taken in to...

Briggs and Stratton 18hp Overhead Valve Adjustment [ 2 Answers ]

I have a Sears Craftsman 1100 lawn tractor with a 18hp Briggs & Stratton Overhead Valve Engine. I am told that the valve needs adjusting every year or it will break the shaft. I thought the valve was self adjusting?

Briggs & Stratton 15hp runs rough at high speed. [ 2 Answers ]

I have a tractor mover with a Briggs & Stratton 15hp, it runs good at lowest speed only, unless I put it at full speed and full choke, it backfire out the muffler and shuts down at any other speed. I ran through the carb, seems clean unless I missed something, the float was stuck and it would...