Ask Experts Questions for FREE Help !
Ask
    sad338ie's Avatar
    sad338ie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2009, 05:21 AM
    Fix shower on off pull valve
    There is water coming from the faucet, the on/off pull valve and the showerhead. How do I fix it?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 28, 2009, 05:59 AM
    We need more information. Brand name of the faucet. How old? One handle or two knobs? This "on/off pull valve". Is it located on the spout or in the valve body? Let me know, Tom
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jun 28, 2009, 10:55 AM

    Or, take a pic of it and post it...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I replace push-pull shower valve ? [ 6 Answers ]

Took all covers ,etc. off.. but valve is still in place. Removed locking U-pin... but valve has brass collar and valve will not pull out, All water off from main. How can I remove?? What should I do. Old unit.. cam with 20year old house. May have lime deposit build up.. hard to push or pull!...

Shower turns on whether the shower pull is up or down. [ 3 Answers ]

I just had a plumber re-pipe my bathroom and install the bath tub. Today we put the shower head on and I turned on the shower to see how it worked. Well just turning on the water made a small flow come out of the shower head. When I pulled the shower pull knob on top of the faucit It had wonderful...

Shower push-pull valve [ 3 Answers ]

Hi, I'm Mike How do I replace the push-pull valve on shower. It looks like it has a rubber or plastic gromet holding the valve in place and I can't figure out how to remove the gromet. Thanks

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

Shower valve hard to pull out [ 6 Answers ]

The shower valve is very hard to pull out. I do not have a brand or model at this time. It is a single valve that you pull out and then adjust hot/cold water by turning valve left and right. I am new to this site; why does it say it was posted at 6:37pm when it is 11:37am in CA

View more questions Search