Ask Experts Questions for FREE Help !
Ask
    Paul AEI's Avatar
    Paul AEI Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 25, 2009, 11:47 AM
    ARC breakers
    Is there a way to check an Arc Fault Circuit Breakers?
    I am looking at a house that a home inspector said the Arc Fault Circuit Breaker was bad. He did not say how he tested it.
    The breaker trips when the test button is pushed.
    And the wires are hooked properly.
    Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Jun 25, 2009, 12:49 PM

    Yes, see: IDEAL 61-059 SureTest® Arc Circuit Tester, Ideal 610 59 - at the Test Equipment Depot
    Paul AEI's Avatar
    Paul AEI Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 25, 2009, 03:53 PM
    Thanks.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Attempting to install GFCI circuit breakers (3 wires for 2 breakers) [ 6 Answers ]

OK here is my situation I have a Siemens box in my home I'm installing GFCI breakers to bring it up to code for insurance purposes Only thing is 4 rooms in this home are for some reason wired together on 3 wires (red black and white) connected to two separate breakers (30 Amps each) (two rooms...

What breakers would I need [ 1 Answers ]

In my rv cabin I will have a small 4.6cubit foot refrigerator, a 5.0 small freezer, a small 2.5 gallon hot water heater, a small 5000btu a/c and 2 shop lights, I will have a 50amp hook-up, which breakers would I need to handle these things with a 50amp hook-up?


View more questions Search