Ask Experts Questions for FREE Help !
Ask
    rcastle62's Avatar
    rcastle62 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 24, 2009, 04:02 PM
    Finding Lawn Genie 1 inch octagon shape solenoid for sprinkler valve.
    I have a grey colored Lawn Genie 1 inch in line sprinkler valve with an octagon (8 pts shape) solenoid which has a plastic stop on the bottom. It is about 15-18 years old. Where can I find a replacement. Thanks. I have tried a Lawn Genie round solenoid which will open but will not shut off. It has a metal tip on the bottom, whereas the original one has a plastic round tip which seems to cover the hole on the valve. Any help in locating a replacement is appreciated. Thanks Randy
    jerry101's Avatar
    jerry101 Posts: 2, Reputation: 1
    New Member
     
    #2

    Jul 31, 2010, 10:54 AM
    I see that your posting has gone over a full year without receiving any response. I have the same problem - a 1 in. octagon solenoid by Lawn Genie that needs to be replaced. Did you find a solution to your situation?
    jerry101's Avatar
    jerry101 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 31, 2010, 10:55 AM

    I see that your posting has gone over a full year without receiving any response. I have the same problem - a 1 in. octagon solenoid by Lawn Genie that needs to be replaced. Did you find a solution to your situation?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn Genie R416LG sprinkler system operations manual [ 5 Answers ]

I am looking for a operations manual for Lawn Genie R416LG residential sprinkler system. It was likely installed in the mid 1980s.

Adhesive? New ceramic tile install - one inch hex shape sheets [ 5 Answers ]

Hello I am putting in a brand new full bath where there had been just a half bath.. I am done the roughing in and the framing, cementboard, sheetrock, etc. - and I have a question about the tile installation. For the floor, I chose an older style of tile that is the white octagon/hexagon...

Splicing Solenoid Wires on Sprinkler Valve [ 1 Answers ]

Hi All, Here's a quick question: I just replaced three sprinkler anti-siphon valves in my yard. The directions that came with the new valves did not give specific information on how to splice the solenoids on the valves. I know which wires needs to be hooked up, but what is the best...


View more questions Search