Ask Experts Questions for FREE Help !
Ask
    sampat123's Avatar
    sampat123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2009, 02:05 PM
    How to replace starter rope on troybuild weedeater tb90bc
    How to replace starter rope on troybilt weed eater model no.tb90bc
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 23, 2009, 03:15 PM

    Hi,
    Because of the nature of the starting system on that unit, it is an assembly. Part #753-04459 It is a "Spring-Assist" starting system. Never seen one fail that was not either carb/fuel problems or operator abuse.
    If the carb is working correctly, it takes almost no effort to crank; does not require a "sharp" pull as a regular two stroke and should never be pulled until the rope extends to full length.
    I was amazed many years ago when explaining to a customer that it did not take pulling the rope out until it stopped to crank his machine. The customer denied doing it! At that point I showed him the stater and the remnant of rope with scarcely anything but a knot left, and asked "Just how do you think you can break it here otherwise?"
    Peace,
    Clarke
    blue77's Avatar
    blue77 Posts: 13, Reputation: 1
    New Member
    		  
    #3

    Jul 18, 2009, 03:21 AM

    Weed Eater Instruction manuals are available for download from:

    InstructionSheets.com - Weed Eater Instruction Sheets

    Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace starter rope on a troy built weed eater [ 2 Answers ]

How do you replace starter rope on a troy built weed eater? The starter rope broke on my Troy built tb70ss weed eater. Need instruction on how to disassemble the machine and install a new rope. Thank you

How to replace starter rope on my Ariens tiller [ 3 Answers ]

The starter rope on my tiller broke and in trying to replace it, the recoil spring for the rope isn't accessible to rewind it so the rope will re wind . I hope the answer is simple and probably is , I just can't figure out how to get the starter cord replaced so I can use the tiller . Thank you for...

How to replace starter rope on poulan pro sm400 [ 1 Answers ]

Hi, I need to replace the starter rope on a Poulan Pro SM400 leaft blower. I have it apart but since the old rope broke off, I don't know how to attach the new one to the wheel. Thank You Carl

Craftsman Weedeater Starter Rope Replacement [ 2 Answers ]

I'm trying to replace the starter rope on my Craftsman Weedeater. Can you tell me how to remove the clutch assembly from the shaft?

How to replace starter rope on snapper weedeater [ 1 Answers ]

I have a Snapper weedeater model #S31sngbc could someone tell me how to replace the starter rope I have most every thing apart but there is still a housing around the pully!!

View more questions Search