Ask Experts Questions for FREE Help !
Ask
    tommy2xx's Avatar
    tommy2xx Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2009, 05:00 PM
    Kenmore dishwasher
    I have a kenmore dishwasher that is a little over 18 months old. There is power to the unit but none of the lights work and the unit won't run. It must have shut down near the end of the cycle because the dishes were clean but there was water standing in the bottom of the unit.
    stuartn's Avatar
    stuartn Posts: 85, Reputation: 2
    Junior Member
    		  
    #2

    Jul 4, 2009, 08:54 PM

    There is an inline fuse attached to the plastic housing of the board in the console. Turn power off to the unit, take the 2 wires off and use an ohm meter to see if it is closed. It may be round or flat with 2 leads.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher [ 3 Answers ]

My kenmore dishwasher still not working and it is flashing washing i tried switching my breaker to have it turn off and try resetting it however nothing is working ?:(

Kenmore dishwasher [ 1 Answers ]

Just moved to a hard water location and the dishwasher heating element is caked with a hard gray crust. The dishes have white powdery deposit that can be wiped off. Is there a way to remove the deposit or do I need a new elememt?

Kenmore dishwasher [ 1 Answers ]

I've tried just about every detergent in my dishwasher and none of them will dissolve.

Kenmore Dishwasher [ 1 Answers ]

Hello, I have an older model Kenmore dishwasher which is no longer washing the dishes clean. What is the most cost-effective method; to repair or replace? Please advise.

View more questions Search