 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pretty easy. Just remove the old switch and wire in a new one. Instructions here:
http://www.ceiling-fans-n-more.com/c...and-repair.php |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
The light pull on the ceiling will turn off the light. The ceiling fan pull seems to work OK. I'd like to keep the fan on and turn the light off; currently unable to do that ;-( With the light switch on, the light is on, the fan is on; I pull the light pull and it switches off for a milisecond...
View more questions Search
|
