Ask Experts Questions for FREE Help !
Ask
    sthomp10's Avatar
    sthomp10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2009, 12:45 AM
    Setup Mode
    Is there a hard reset? Setup is locked out and I need to reprogram TV to edit out missing channels.
    Couchcarrot's Avatar
    Couchcarrot Posts: 590, Reputation: 41
    Senior Member
    		  
    #2

    Jun 28, 2009, 11:48 PM
    This depends on the make, model and year of the television. If you still have
    Your Owner's Manual, see if you can use the instructions for returning it to
    Its "Factory Default" status.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower in furnace works in heating mode, not in cooling mode [ 5 Answers ]

The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...

Carrier A/C Blower will not come on in A/C mode but works when in heat mode [ 3 Answers ]

I need some guidance. I have a Carrier A/C unit that has been working fine. Last night the fan stopped working for some reason in the A/C mode. But when I put the heat on, it works fine. The compressor and condenser work fine but the A/C fan just will not kick on. I thought it might be the...

Fan runs forever when in heat mode but not in ac mode [ 2 Answers ]

Great web site and concept!! I have a York forced air gas furnace that has a Honeywell Fan Limit switch. The unit works great in the summer. The ac and the fan shut off correctly. However, in the winter the heat will reach its temp setting and turn off but the blower continues forever. I have...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 6 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 2 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

View more questions Search