Ask Experts Questions for FREE Help !
Ask
    colleen2278's Avatar
    colleen2278 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 15, 2009, 10:17 AM
    Fiberglass shower.can I cut and repair
    I recently purchased a fiberglass shower... one piece unit at a great price... to make a long story short this unit was for the downstairs bathroom... it is to big to fit down the stairs due to the base... can I cut the unit and the put it back together?:confused:
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Jun 15, 2009, 11:11 AM

    Colleen, unfortunately, no, you cannot cut One Piece Pre-Fab shower unit and put it back together.

    However, you can buy a pre-fab shower unit, like LASCO, that comes in 2 or 3 pieces. It is a heavy duty unit, not the one you get in Home Depot. You disassemble it into pan and walls and reassemble upstairs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cleaning fiberglass shower pan [ 11 Answers ]

I just regrouted a shower area and it turned out great. However, the home has a MUSTEE fiberglass shower pan. The pan is showing staining and discoloring in the foot traffic area. I have tried Tilex and many other shower cleaners with no improvement on the staining. I'd appreciate any advice to...

Fiberglass shower stall, new shower set [ 4 Answers ]

We just bought a new shower set for our bathroom but found out we have a problem. It's a fiberglass, 1-piece tub/shower and the hole where the valve comes out is too small to remove the old one. We have two bathrooms and the other tub/shower is back-to-back with the one we're trying to change. This...

Installing hand-held shower on fiberglass shower [ 2 Answers ]

I am installing onto a fiberglass shower a rain fall shower system that has a separate hand-held shower head. The two options to install are using a suction bracket or using the bracket with a screw. Can I drill into the fiberglass to use an anchor and screw? Thanks very much. Cheryl

How do I repair a hole in a non-fiberglass bathtub [ 1 Answers ]

I have a quarter sized hole in a rental apartment that is leaking water. One (expensive) option is to pull out the bathtub & replace it and another option is to install a liner. Reading about liners, it seems that they are easily damaged resulting in a bigger headache. Is there a way to repair the...

Fiberglass Shower Leak [ 2 Answers ]

My second floor fiberglass surround shower is causing a leak from the first floor ceiling. I don't know what to start with to try to fix it. I hope someone can help me.

View more questions Search