Ask Experts Questions for FREE Help !
Ask
    raebrown63's Avatar
    raebrown63 Posts: 3, Reputation: 1
    New Member
     
    #1

    Jun 12, 2009, 07:32 PM
    Low Water Pressure after Appliance Replacement
    I had my refrigerator and dishwasher replaced today and now the entire house has very little water pressure! Why?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #2

    Jun 13, 2009, 04:13 AM

    Did you have to close main water valve for the whole house to install the fridge and DW ?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Jun 13, 2009, 04:34 AM
    How old is your house and what type of pipes do you have? Is both hot and cold affected? What did you shut down to install both appliances? Back to you, Tom
    raebrown63's Avatar
    raebrown63 Posts: 3, Reputation: 1
    New Member
     
    #4

    Jun 13, 2009, 05:42 AM
    Quote Originally Posted by Milo Dolezal View Post
    Did you have to close main water valve for the whole house to install the fridge and DW ?
    No - only the water at the sources was closed off.
    raebrown63's Avatar
    raebrown63 Posts: 3, Reputation: 1
    New Member
     
    #5

    Jun 13, 2009, 05:45 AM
    Quote Originally Posted by speedball1 View Post
    How old is your house and what type of pipes do you have? Is both hot and cold affected? What did you shut down to install both appliances? Back to you, Tom
    My house is 7 years old and I believe it has copper piping, but I'm not sure.
    Both hot and cold are affected and only the water at each source was shut down for installation.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Heater Replacement Created Water Pressure Loss [ 8 Answers ]

I recently replaced my hot water heater, basically same capacity, etc. as the previous heater. I am noticing a drop in water pressure in the entire house, guess would be 20-25%. The only change is I used a dielectric union between the new heater and copper pipe. I have to assume the water heater...

Water pressure slowed after replacement put in [ 1 Answers ]

I have a glacier bay wall mount faucet. The water comes out half the pressure whether hot or cold is on. It worked fine after installation of the new faucet, then the next morning it slowed to half. All other pressure in house is fine and I have no leaks. HELP!

Water line replacement = entire house low water pressure [ 3 Answers ]

I recently had a water line break in my front yard. The city replaced the line but ever since (immediately following the water being turned back on) the water pressure has been significantly lower throughout the house in both the hot and cold. I checked and the valve is completely open so I am...

No water pressure in downstairs faucet after replacement. [ 4 Answers ]

I just replaced the faucet in my downstairs bathroom and when I turned the faucet on the first time the water pressure was fine, then I adjusted the handles under the sink because if I opened the hot all the way it dripped. When I turned the faucet back on I have almost no pressure (a little more...

Water pressure tank replacement questions [ 1 Answers ]

I am having a problem with my well pump short cycling because the water pressure tank has some sort of blockage in it and will not allow water to enter the tank. I read Speedball's solution to a similar question which was also my problem.. I would like to get a new tank and would like to know if...


View more questions Search