 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan remote control module output.
Just wondering why my remote control receiver (inside fan) is only putting out 1.7V when the light is turned on via remote. I need this to be 120 output or my setup I have going on isn't going to work. I have two of the same fans and they are both only putting out 1.7V, any explanation for this?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
I have a Hunter Fan (Palermo: model#21618), and have a defective receiver. I have purchased the Hunter replacement All-Fan Remote Fan and Light Control (model#27185). The problem is this: Fan has seven wires (white, black/wht, green, red, pink, grey, yellow) The new reciver has five...
Can I use a ceiling fan without the remote control.., I moved into a house and the ceiling fan does not turn on by the switch... The past owner says the remote SHOULD be around somewhere... I can't find the remote what should I try...
I had a Hampton Bay multi-function remote control unit installed to a pre-existing ceiling fan. The remote controls both the fan and light. Since that time, the light will turn on and off, dim, or blink mysteriously without anyone pressing the control buttons. The fan's timer is turned off, so...
The worst thing I ever did was buy a ceiling fa n with a remote.. I lost the remote. Now I can't turn on the light and fan.. I purchaced a universal one and it don't work.. How do I get anither remote.. Or how do I get the light and fan to work with out the remote control
View more questions Search
|
