Ask Experts Questions for FREE Help !
Ask
    swallace81's Avatar
    swallace81 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2009, 07:01 PM
    Can I have an up-light without the light kit?
    I have a Harbor Breeze, Rutherford 52" #295002 fan that has an up-light. The light kit will hit my rice bed. Can I use the up-light without hooking up the light kit?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 8, 2009, 08:44 AM

    You can use the fan without the light kit but with not kit you get no light.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 30, 2009, 01:20 PM

    The question is, can the bottom light be removed? I doubt it but I would need to see a picture.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

99 Honda accord no parking lights or dashboard background light + SRS Light on [ 3 Answers ]

Recently I believe a problematic bulb caused a short in my car's Electrical system. The reason I say this, is that the following Problems have come up since I used the trailer... 1. SRS light is now on 2. The light that illuminates the spedometer, RPM's, and gas (background light) doesn't...

Stuck string on ceiling fan/light combo light side [ 1 Answers ]

I have a ceiling fan/single light combo, and the pull string to switch on the light is stuck... How do I dismantle the light fixture part to get at the string?. Will I need to replace anything inside?

Leviton PR150 Motion LIght Control Flickers light instead of keeping them on [ 4 Answers ]

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

Light at own home produces sound when light at neighbor's house is switched on [ 4 Answers ]

I've moved into an apartment. I noticed that whenever I switched on my fluorescence light and when my neighbor switches on his light, my fluorescence light would produce a 'rrrrr' or 'mmm' sound which sometimes can be loud and irritating. I have tried changing the light bulb and even the ballast...

View more questions Search