Ask Experts Questions for FREE Help !
Ask
    rosgomusic's Avatar
    rosgomusic Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2009, 06:32 AM
    No heat Kenmore Elite Dryer 110 63932101
    Hello
    I have a 5 year old kenmore elite dryer Mod # 110 63932101 that will not heat. I read some of the answers for solving this problem but still feel it does not completely apply to my situation. I have physically pulled out the heat element and looked for breakage but it seems OK. I do not have an ohm meter but have used a circuit tester and checked continuation on both sides of the red wires on the element with a positive reading on both sides. Also I checked the termos the same way with continuation on both as well.
    Still no heat. What should I check next on this dryer?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 6, 2009, 06:49 AM

    Volt meter would work better. If you have voltage to element and it doesn't heat, it is open.
    Then If able to work safe with Electrical. Turn dryer on and measure voltage across thermals, if you read voltage across the 2 terminals, it is open.
    Topeka_Resident's Avatar
    Topeka_Resident Posts: 5, Reputation: 2
    New Member
    		  
    #3

    Jul 7, 2009, 12:57 AM

    The vent hose might be blocked; check it and remove any excess hose. That will help, and prevent overheating
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Dryer won't heat [ 16 Answers ]

I have a heavy duty Kenmore Elite dryer for about 5 years (bought new) but it doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. We clean lint out each time. Just doesn't heat on any of the dial settings. I've switched power at the...

Kenmore elite dryer won't heat [ 1 Answers ]

Kenmore elite dryer won't heat

Kenmore Elite Dryer Won't Heat [ 1 Answers ]

I have a Kenmore Elite dryer that doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. Replace ignitor and cleaned all vents. Just doesn't heat. It's an electric dryer. Model number 110.73022101 Recommendations? Thanks!

Kenmore Elite gas dryer won't heat [ 5 Answers ]

I have a Kenmore Elite Gas Dryer model number 110 72056 100. When I select a cycle to dry; they dryer turns, the air is blown out of the house; :confused: however, it is cold air even though I have selected a hot air cycle. Please let me know if you know what could be wrong with this. ...

View more questions Search