[jcaleman3]

Hello Gang, I am having problems with a kenmore front door washer machine, it does not want to dispense dirty water, it just kip turning back and forward like washing but does not kick a final spin... help me if you know some... thanks guys.

[Flying Blue Eagle]

Jacleman3 - OK without being there , it could be one of several things ;i will try to get the right one ;; here is the most causes of this problem;; #1- Spin solenoid is defective or going out;NOTE- if one of THE TWO IS DEFECTIVE IT IS REWQUIRED [RECAMINDED] THAT BOTH THE AGIATE AND GTHE SPIN BE REPLACED AT THE SAME TIME;;#2- tIMER IS DEFECTIVE;; #3- lid Safety SWITCH IS ,DEFECTIVE . OR OUT OF ADJUSTMENT ;; #4- dRIVE BELT IS SLIPPING, LOOSE .BROKEN;; #5- bASKET {tub} ISW JAMMED BY CLOTHING CAUGHT UNDERNEATH IT;; #6- DRAIN PUMP IS DEFECTIVE OR JAMMED;; sOME OF THESE YOU CAN CHECK BY JUST LOOKING ;; SOME WILL HAVE TO BE TESTED Using A [volt-ohm METER} IF IT COMES TO TESTING THE ITEMS ,COME BACK ON TO THIS POST AND LET ME KNOW ;AND I CAN LEAD YOU THREW IT STEP BY STEP ;; note - YOU WILL NEED A volt-ohm METER } TO DO THE TESTING WIYH;; YOU CAN GET ONE FROM Lowe's <home depot:: or elecrtrical store : if you get one <get it where you can test 250 volts a/c OR d/v voltage :: good luck and god bless ::f.b.e.