Ask Experts Questions for FREE Help !
Ask
    Burkart10's Avatar
    Burkart10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2009, 06:55 AM
    Nutone central Vac won't start motor
    I have Nutone's central vacuum system. The model number is: CV-353W. I have assured there is power to the unit, but neither the switch on the motor nor the in-house hose inserts will turn the motor on. I have looked for the reset switch, but other than a small black circular thing attached with a screw-on ring, I find nothing to reset. I have pushed around on that in desperation, but still nothing.

    What now? Is there a Nutone repair service in The Villages, Florida, 32162? Any help would be so appreciated. Thanks.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 5, 2009, 06:59 AM

    Verify power to the outlet.
    Open wiring to the inserts should not stop the switch on the motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor won't start [ 1 Answers ]

We have a RPJ heat exchanger Comfortmaster# GUG0948016N. I started the air, but the blower will not start. I swithed it to on-still nothing.How can I find out if it's the thermostat or if it's the motor itself.:

Central heater won't start [ 1 Answers ]

I turn up my thermostat and don't hear that familiar flame light and start to blow.Does anybody know what's the problem?thanks.

Replaced Gas Valve, Central Air Heater won't start when its cold out [ 6 Answers ]

Each year when it gets cold, my Gas Air Conditioner won't start when its to cold out. I turn the thermostat up, the unit clicks but then doesn't start right away. Sometimes it won't start until the sun hits the air conditioner. Last year I replaced the valve and cleaned the flame sensor. From...

Kenmore 110.28932790 The motor won't start itself [ 3 Answers ]

Hi, My washer stopped washing so I opened it up and did some troubleshooting. Looks like there is issue with motor. It does not start itself when I pull the timer knob. It just makes a humming sound sits there. However if I spin it by hand it starts rotating and then keeps on running. Curiously,...

Furnace motor has power but won't start [ 2 Answers ]

My furnace motor will not start, however if I give it a gentle turn by hand (via the fan), it starts right up and runs fine. Is the is capacitor or a switch problem in the motor? Thanks...

View more questions Search