 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
There should be a diagram on the back side of the blower motor door. This diagram will show where and how the wires are placed on the circuit board. The actual etching of the board or component placement and usege is propritary information and usually not posted by the manufacturer. They want you to buy a new board if the old one is bad and they do not want you to try and repair it since by repairing the board it is possible to put your life at risk from a defective repair.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
In repairing an equipment that has a broken circuit board, you must ground yourself to the body of the equipment your working on to prevent what from damaging??
We purchased a new controlboard for our rheem furnace but it is not exactly the same and the wiring diagram is not matching up like the old one, for instance with the old one the heat and cold wires are black and blue on the new one the diagram says balck and red. Why is it different, and is there...
My Rheem water heater keeps popping the circuit. There is a green light that keeps flashing. I can't tell if it's trying to light the pilot light. This model should automatically start the pilot light. Any ideas?
I have a Reem ac unit and the blower motor won't come on. It has power to the circuit board but the green light is not on located on the board.
Hello all. New at this site and loving it. Thanks for having me. My question is this. I'm having trouble with a disco light. This guy came in and dropped it. He says there might be wrong with the ic chip or it could be fuses. OK first things first I replaced all the fuses with new ones....
View more questions Search
|
