Ask Experts Questions for FREE Help !
Ask
    jodyroyee's Avatar
    jodyroyee Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2009, 09:13 PM
    One track of a group of 3 stopped working
    Hampton Bay Track system: I placed 6 halogen spots on one section of track, then proceeded to add a spot in the next track section , bad news, the track with 6 lights quit working just as I touched the light to the track. I've removed all the lights turned off the light switch and still can't get the "bad" section to work?
    :confused:
    Thanks for help,
    Jody
    jerro's Avatar
    jerro Posts: 172, Reputation: 5
    Junior Member
    		  
    #2

    Jun 4, 2009, 07:13 AM

    Is this new track lighting? What wattage is each of the halogen spots? Does a light work in either of the other 2 tracks? Check and make sure you did not trip the breaker powering the tracks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jun 4, 2009, 08:02 AM

    Yep, breaker is my first stop. You should not make connections while the track is powered.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Track Lighting: 6 pendant lights/4 sections of track 2 lights not working? [ 4 Answers ]

Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...

Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working [ 2 Answers ]

I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?

V Twin 22 HP stopped in its track [ 2 Answers ]

My craftsman V Twin 22 HP Kohler was working and running just fine then stopped running during cutting. No response when turning the inition, had the battery checked all is good. Still no sign of life buzz or clicks. What and where should I begin?? Thanks

Track lighting suddenly stopped working [ 2 Answers ]

I had to move a previously installed and working track about 18inches from it's original position. I tested it in it's new position and it worked. I screwed it to the ceiling and it didn't work. Took it apart, put it back together. Nothing. There is power to the feed connector but none of the...

One Light Stopped Working on a Track of 3 [ 2 Answers ]

We have a track light that has been up for a year with no problems. One bulb burned out (we thought). We got a replacement bulb from the hardware store and changed it, but the bulb still won't work. We checked and the bulb is the correct type. It plugs in fine, fits snug, and everything seems...

View more questions Search