 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman self-propelled lawnmower
I have a crafsman self-propelled lawnmower. I'm having trouble with the drive mechanism, it is on when I start it without me engaging it. I looked at the drive mechanism and all looks OK, I also checked the drive cable and it is connected and working. What should I be looking for.
|
||||
|
||||
|
Post model number. Diagram is at Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com Better yet, post link. |
||||
Originally Posted by keepitsimplestupid
|
||||
|
Holding poster's hand: Type your model number in the box where it asks for it. Be nice and post the resulting link so I don't have to. We cannot read your mind to get your model number from it. But the model number is necessary to see the parts breakdown and exploded view of your mower. It's the hope that the diagram will shed some idea on how your drive system works. It may not. Get it? |
||||
|
||||
|
I guess it's time for you to call. The link I get is this: CRAFTSMAN | Model #917377795 | ROTARY MOWER | SearsPartsDirect.com Which returned NOTHING. It's very unusual that there is not a parts breakdown diagram. Usually the individual parts are listed as unavailable. The best you can do at this point is to post a picture using "Go advanced/Manage attachments" |
||||
|
||||
|
Now it's my turn to be stupid (migraine, again). The info is there. Here is the entire drive assembly schematic. http://www.searspartsdirect.com/part...ponents%20list It looks as if the pully is engaged by some friction mechanism. If the belt has been replaced it could be the wrong one and it could grab. Also look for bushings that are not round. Look at #11 and #30. The friction disk and the adjustment. But I'll bet items #21 is worn. Sorry I had a bad day and didn't see it the first time. |
||||
|
||||
|
Now it's my turn to be stupid (migraine, again). The info is there. Here is the entire drive assembly schematic. http://www.searspartsdirect.com/part...ponents%20list It looks as if the pully is engaged by some friction mechanism. If the belt has been replaced it could be the wrong one and it could grab. Also look for bushings that are not round. Look at #11 and #30. The friction disk and the adjustment. But I'll bet items #21 is worn. Sorry I had a bad day and didn't see it the first time. |
||||
|
||||
|
I guess close doesn't count. I did not find the exact model number, one digit off but check page 38 of the manual. http://www.managemyhome.com/mmh/lis_...M/L0401286.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
It turns on and rides fine but once I pull the blade engagement switch nothing happens. I guess what I am asking is why the blades won't engage?:confused:
What is the correct gapping for my craftsman 650 series lawn mowers spark plug?
I just purchased a 42" 16.5hp Craftsman lawnmower from a guy that bought it new, used it for two seasons and put it in storage for the last five or six years. I can't get it to start. When I put the fuel line directly into the carb it starts and stays running as long as I keep the fuel flowing...
I just started cutting the grass and the mower just stopped. I charged the battery overnight and checked it with a multi meter and it read 10 volts. The mower will not turn over, click or anything. It has a Kohler Pro 18hp engine. Any ideas, I am stumped.
We have tore this mower apart. Does anybody have a picture of the workings of this stupid thing? It is model#917.272352. At this point any info would be appreciated!!
View more questions Search
|
