Ask Experts Questions for FREE Help !
Ask
    vaughanster's Avatar
    vaughanster Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2006, 07:47 AM
    Bathroom lights
    Simple one to start with wife has just bought chrome pull switch for bathroom , on new switch it has 3 terminals L1 L2 and C only 2 wires from old switch no colors cannot see L1 L2 or C on old one which wires go where... :confused:
    bhayne's Avatar
    bhayne Posts: 339, Reputation: 4
    Full Member
    		  
    #2

    Oct 11, 2006, 08:27 AM
    I think you've got the wrong switch but you can easily make it work. Attach one conductor to C (common) and one conductor to either L1 or L2. Done.
    vaughanster's Avatar
    vaughanster Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Oct 23, 2006, 07:05 AM
    Quote Originally Posted by vaughanster
    simple one to start with wife has just bought chrome pull switch for bathroom , on new switch it has 3 terminals L1 L2 and C only 2 wires from old switch no colors cannot see L1 L2 or C on old one which wires go where.....:confused:
    Thanks for help done and dusted easy...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Outside House Lights [ 1 Answers ]

While mounting lights on the house my better half pointed out the lamps are angled because of the siding. What I'm wondering do they make a panel that mounts behind the lamp base that will make the light vertical? Thanks for your time. Al

Another Bathroom is needed... The boys are fighting to use the bathroom [ 7 Answers ]

First, thank you for having this kind of forum. Now also let me say that I'm not well versed in the plumbing lingo so hopefully you will be patient with my questions. I live in a 3 levels home (Basement, Main, Upstairs) with the existing bathroom is on the main floor. I'm planing to add...

Too many lights [ 2 Answers ]

How many lights can you run off one 15 amp breaker in order to be in compliance of code?

3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch? [ 2 Answers ]

There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too...

HB lights? [ 2 Answers ]

I have moved into a house with two ceiling fans without lights. I want to add lights to them. I THINK they are HAMPTON Bay, but am not sure. Can't find model numbers, but styles seem similar to HB fans. I'm looking for a place to buy a light fixture that fits with the fans. ANy suggestions?

View more questions Search