Ask Experts Questions for FREE Help !
Ask
    hdoutla's Avatar
    hdoutla Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2009, 10:07 AM
    How do I drill a hole in a mirror?
    I need to drill holes to accommodate small screws to hang a soap dispenser.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 2, 2009, 10:17 AM

    I would use a diamond bit.
    http://www.toolocity.com/Brazed-Core...FRLoxgod3T-akA
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jun 2, 2009, 12:23 PM

    I would agree but also suggest that you consider an adhesive like the one sold in auto parts stores for review mirrors. Once you get the hole in the mirror your cracking worries aren't over. When you install an anchor or molly you risk cracking the mirror when tightening the screws.
    hdoutla's Avatar
    hdoutla Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jun 2, 2009, 01:50 PM
    G4reat idea!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drill Hole in Stainless Steel Sink [ 30 Answers ]

How do I drill a 3/4" hole in a stainless steel kitchen sick?

Where to drill the hole for dishwasher drain [ 15 Answers ]

I am installing a new dishwasher in new cabinets. I am not installing an air gap and I planned to put a high loop under the countertop. However upon unpackaging the dishwasher I see that it has a built-in high loop in the drain line (attached to the side of the dishwasher itself). Since the high...

Drill 40 mm hole in PVC [ 4 Answers ]

'Turns out a ping-pong ball is 40 mm in diameter. I'm trying to build a check valve. I need to drill a fairly precise 40-mm hole in a 3/4 x 1 1/4 PVC adaptor. Do "they" make drill bits that large? Any other suggestions on constructing check valves?

Drill hole toilet tank [ 2 Answers ]

Need to drill a hole in toilet tank to expand lever Need tips-drill bit, speed, etc

Drill hole in ceiling and floor [ 3 Answers ]

I need some help. I ned to drill a hole from my downstairs room through the ceiling and through the floor of the upstairs room, I want to put it close the upstairs basebaord as possible. How can I accurately drill the hole so I don't end up in the middle of the room or worse yet, inside a wall....

View more questions Search