Ask Experts Questions for FREE Help !
Ask
    zoop's Avatar
    zoop Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2009, 03:48 PM
    Honeywell thermostat
    I install a honeywell thermostat heat works but the air dose not
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    May 29, 2009, 03:53 PM

    What model honeywell. What type system do you have, conventional, heat pump, electric. What wires were hooked to what spots on old thermostat, and what wires did you connect spots on new stat. Let us know a little more about this and we will do our best to get you back in ac.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    May 29, 2009, 03:56 PM
    You wired wrong
    After you make sure the breaker is on and that there is power at the a/c unit
    Recheck the instructions that came with the honeywell, then check them again
    Get back to us with model number of the honeywell and furnace/airhandler,, maybe we can help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

Replace Brant standard thermostat with HOneywell thermostat [ 40 Answers ]

HI guys, I have a Bryant Heat Pump system with axilaury heat and A/c, I want to replace the Honey programmable thermostat, but still reluctant to install it myself since the wire label different. My new Honeywell model is TH6110D1005 and it has following wire label. G O/B (W) C Y R Rc ...

How do I wire my new honeywell thermostat replacing the old tempstar thermostat? [ 1 Answers ]

I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search