Ask Experts Questions for FREE Help !
Ask
    sudeepsil's Avatar
    sudeepsil Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 27, 2009, 03:10 AM
    Windows - Drive not ready
    I'm getting an error message " Exception Processing Message c00000a3 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c". Every time I boot the system this error message keeps popping up. Please help in this matter.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #2

    May 27, 2009, 04:15 AM

    At what point in the boot process do you get this?
    Ramish's Avatar
    Ramish Posts: 74, Reputation: 1
    Junior Member
    		  
    #3

    May 27, 2009, 04:28 AM
    When does exactly the messages appears on your screen? Is it after the Black & White (DOS) screen disappears while loading Windows? Or some other stages.

    What is the screen color where you see the message? Does your Windows go ahead even after you receive the message?

    Please tell me more in details so that I can help you!

    CHEERs,
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #4

    May 27, 2009, 03:39 PM

    Any changes that either happened or that you perhaps made to your computer around the time that the problem started; particularly any Software or Hardware that you installed or setup.
    What OS?
    sudeepsil's Avatar
    sudeepsil Posts: 4, Reputation: 1
    New Member
    		  
    #5

    May 28, 2009, 03:14 AM
    Quote Originally Posted by ScottGem View Post
    At what point in the boot process do you get this?
    As soon as I log in to my account I receive this error message.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #6

    May 28, 2009, 05:49 AM

    So, the Windows logon screen (what version of Windows?) shows up. You select your account and the error comes. Does it continue to boot afterwards or does Windows not load?
    sudeepsil's Avatar
    sudeepsil Posts: 4, Reputation: 1
    New Member
    		  
    #7

    May 28, 2009, 09:47 PM
    Quote Originally Posted by ScottGem View Post
    So, the Windows logon screen (what version of Windows?) shows up. You select your account and the error comes. Does it continue to boot afterwards or does Windows not load?
    The version is Windows XP SP3. I can continue my work even though the error message pops up. I simply drag and keep the error message box to the utmost corner of the screen.
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #8

    May 29, 2009, 10:36 AM

    And what happens if you just close the error box?

    Have you tried booting to Safe Mode and see if you still get the error?
    Ramish's Avatar
    Ramish Posts: 74, Reputation: 1
    Junior Member
    		  
    #9

    May 29, 2009, 11:44 AM
    Quote Originally Posted by sudeepsil View Post
    As soon as i log in to my account i receive this error message.
    Did you try to log in with the Administrative Account (Administrator) and check the boot partition or System Partition(s) for ACL permission?

    Try to log in with the Administrative account and see if you have full NTFS permission on system Partition(s) (Usually the C:/ Drive) and the boot partition (almost always the C:/ drive).

    Give me a bit more details, so that I can help you

    CHEERS,
    sudeepsil's Avatar
    sudeepsil Posts: 4, Reputation: 1
    New Member
    		  
    #10

    May 30, 2009, 12:22 AM
    Quote Originally Posted by ScottGem View Post
    And what happens if you just close the error box?

    Have you tried booting to Safe Mode and see if you still get the error?
    If I try closing the error box, it again pops up within 4-5sec. This is the same case in safe mode also.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Windows 95 - Computer won't ready discs. [ 2 Answers ]

Ok so my parents just let me screw around with an old computer. Its an old computer with Windows 95. I keep trying to put in CDs but it won't read them. The drive opens and closes but nothing happens. The light by the CD slot won't turn on. I don't know if its broke or what. I put a CD in once and...

Drive not ready. Insert boot disk into drive A: [ 4 Answers ]

I am currently trying to upgrade from windows 98 to windows xp. I have upgraded the RAM to 256. When I reboot I get "Drive not ready.. Insert Boot Disk into Drive A:". I have gone into the BIOS and have changed the boot sequence to boot first from the hard drive then the cd rom. It still...

Drive 5 windows XP [ 1 Answers ]

Every time I re-boot a black screen comes up and the message reads as follows: Drive 5 in your operating system is missing. Please advise. Thank You

Windows - drive not ready ! Who can solve this prob. [ 0 Answers ]

Hi all When I shutdown the PC I get error message said "" windows - drive not ready ""

Drive Not Recognized in Windows XP [ 2 Answers ]

!! PLEASE HELP ME!! Okay, I have been beating my head against the wall for two days now, and I have been without my system for a week, so I'd really appreciate the help. I built a system three days ago and everything was going perfectly had programs up and functioning great. I have two...

View more questions Search