Ask Experts Questions for FREE Help !
Ask
    Mrs Ross's Avatar
    Mrs Ross Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 29, 2009, 06:08 AM
    Oven door back on and too high!
    Indesit gas oven FG 10K GB

    I have removed my oven door to clean it and put it back on after. When I closed it, the door was too high up and is not sitting correct.

    I slotted the brackets into the holes and turned the catch 180 degrees and now I cannot move the catch back the 180 degrees to enable me to lift the oven door to start again.

    I need some help please to explain to me what angle I need the door in to enable me to turn the catch back the 180 degrees. As it is now, the catch is in he hole too far to enable me to rotate it towards me to get the door off. Many thanks in anticipation.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 29, 2009, 06:24 AM

    It is a very strong spring, would be tough to describe. If door won't open or close more, you might try a firm grip and lift or pull down while trying to pull out.
    Mrs Ross's Avatar
    Mrs Ross Posts: 3, Reputation: 1
    New Member
    		  
    #3

    May 29, 2009, 07:13 AM
    I am replying to the person who helped me to tell you that I made a note of your advise and went back to the kitchen.

    With you HELP I have managed to sort it and the oven door is closed now.

    Thanks so much to you from Derbyshire in the United Kingdom.

    A thousand thank-you's.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    May 29, 2009, 07:26 AM

    Your welcome , from the Florida Keys.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I open my oven my locked oven door [ 3 Answers ]

How can I open my locked oven door?

Oven door repair [ 2 Answers ]

I removed an oven door to make cleaning easier. Now I cannot get it back on. It has 2 hook like catches on each side of the door and there are two bars that I can see to slide the hooks onto, but the hooks won't go far enough in to catch on the bars. Any suggestions or tricks to putting this...

Oven door won't close ! [ 2 Answers ]

I have an old Westinghouse wall oven- Coppertone color no less! It was in the house when we bought it 32 years ago. The model # is OC821XT1- I think. Over the past several years the door would "catch" just before it was closed. Like something was blocking it. A couple of hard tries and it would...

Oven door repair [ 2 Answers ]

My oven door hinges are broken and the glass on the door has shatterd how do I repair it?:confused:

View more questions Search