Ask Experts Questions for FREE Help !
Ask
    jemster303's Avatar
    jemster303 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 28, 2009, 01:14 PM
    Single Lever Faucet Install.
    I just purchased a single lever faucet. The vanity top I like has 3 predrilled holes. Will my new faucet fit on the three hole top?
    Thx!
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    May 28, 2009, 01:25 PM

    Unless you bought a faucet that calls for a one hole application your faucet that you bought should cover the three holes. There could be a little problem with the bases not being exactly alike and them not governing the same area of the vanity top. So be real easy in the way that you clean the top before you put on the new faucet. Do not do any scraping around the edges where the old faucet fit, the marks will show. Use a non abrasive cleaner if it will do the work for you.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 28, 2009, 01:53 PM

    Your faucet may or may not cover the 3 holes, it deopends on what you bought. Many bath faucets can and will cover that space but you may have to exchange yours if it does not cover. There are plates that can be used but they look pretty cheesy.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    May 28, 2009, 01:58 PM

    Bob Can't Rate you would not let me, Excellent advise, Thanks.

    Regards,
    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Single lever faucet shakes and knocks [ 1 Answers ]

I installed a new single lever kitchen faucet. When the faucet is turned on, hot, cold, or a mixture doesn't matter, there is a violent shake and knocking, whick does not go away even if you let the water run. How do I fix this?

Installing a single lever shower faucet [ 1 Answers ]

I need to know the names of the materials needed to install a new single lever faucet in a shower and instructions on how to install it starting from the rough in stage. I have the hot and cold supply lines capped off at this time.

Installation of single lever faucet on bath tub [ 1 Answers ]

How to replace the 2 handle faucets on a bath tub with a single lever faucet. How to install and what to use inside the wallwork plumbing.

Install Single Lever Shower Faucet [ 2 Answers ]

I am looking for information on installing a single lever shower faucet. This will need conversion from the existing 2-faucet that is there now.

Single lever faucet [ 1 Answers ]

After a year or so, the single lever kitchen faucet (which I believe is a Delta) we installed, will no longer switch to the cold water side. This just happened yesterday and we are unsure where to start looking for the problem. It is not under the sink, as we have looked at the connections and they...

View more questions Search