 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Open the two links below and you be able how to disassemble your faucet to replace the cartridge, good luck. John http://www.plumbingpartsdepot.com/pp34serkitch.pdf Price Pfister Avante Kitchen Page |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...
I have a 1 year old PF faucet (expensive) which will not remain partially open... say about 50% or less the handle closes and shuts off the water. Wide open stays open. The handle has a 'button' on the top, but it doesn't want to come loose with fairly gently prying. Please help! Jerry Triggs
I have a Price Pfister 533 with a leak. I have taken off the handle but I can't figure out what to unscrew/take off next. The Price Pfister site is down!
New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in...
Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper
View more questions Search
|
