Ask Experts Questions for FREE Help !
Ask
    cfw700's Avatar
    cfw700 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 23, 2009, 02:40 PM
    Fan wiring schematic needed
    I have a regency ceiling fan model AC552 Or AC 532. It is hard to read info on fan. I was trying to trace the wiring and accidentally fulled on a gray wire that came out. I don't know what it is for. It went up the pipe but did not exit at the other end of the pipe. I think it went into the motor housing. I hate to completely disassemble the fan but I might have to unless you have a suggestion.

    Thanks,


    Charles Williams, DDS
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    May 27, 2009, 06:29 PM

    Which end came disconnected. The end in the motor or the end in the switches?
    cfw700's Avatar
    cfw700 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    May 28, 2009, 05:59 AM
    Quote Originally Posted by ceilingfanrepair View Post
    Which end came disconnected. The end in the motor or the end in the switches?
    It was the end that went into the motor. It was attached to one of the windings. I had to disassemble completely the unit to get to the problem. I have it working now. Thanks for your reply.

    Regards, Charles Williams, DDS
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    May 28, 2009, 10:38 PM

    If you opened the motor and reattached one of the winding leads, you're head and shoulders above the majority of people I've met. Congratulations.
    cfw700's Avatar
    cfw700 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    May 29, 2009, 02:30 PM

    I'm using the old ceiling fan in my workshop.

    Thanks for your response,

    Charles F Williams
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 790-46352400 schematic needed (range) [ 3 Answers ]

I would like to thank you for being here first. I did try and find an answer prior to posting my question. The handle on our electric range/cooktop (Kenmore 790-46352400) is loose on one side and I cannot find an owners manual to see how I gain access to tighten the handle. I don't want to...

Wiring schematic [ 1 Answers ]

Wher can I find a wiring schematic for a 1996 escort

Plumbing schematic needed [ 1 Answers ]

Does anyone know a good website to find help in putting together a plumbing schematic? I need to draw one so I can get a building permit for a remodel.

View more questions Search