Ask Experts Questions for FREE Help !
Ask
    apeters100's Avatar
    apeters100 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 27, 2009, 11:30 AM
    Shower pan drain installation
    How do I install a drain for a preformed shower pan:
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 27, 2009, 11:42 AM
    Would this be a shower pan for a custom tile shower or a manufactured shower base?
    apeters100's Avatar
    apeters100 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 27, 2009, 11:46 AM

    It is a manufactured shower base
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    May 27, 2009, 03:23 PM
    What is it you wish to know? The correct drain for your base? How not connect a drain that's already in the base? You haven't anything to work with. I still don't know exactly what you're asking. To answer a question such as yours we need to know the type of drain, the material the pipes are made of. In short we need details and information .Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

PVC Shower Pan Drain Installation [ 2 Answers ]

I'm installing a 36" x 36" PVC shower pan in a 2nd floor bath. I have a two piece shower drain where the bottom piece is glued to the 2" PVC waste line. It appears that I'm to glue the bottom piece flush with the subfloor, lay in the pan, and screw down the top of the drain (w/ rubber gasket). ...

Shower Drain Installation [ 3 Answers ]

As part of a remodeling effort, we are having a tiled shower built in our guest bathroom. We had a plumber come out to run the water and drain lines. He installed the drain. Last night I noticed that the hole he cut in the plywood sub flooring is quite a bit larger than the drain, so that...

Shower drain installation [ 2 Answers ]

Hi I'm installing a new shower base that came with a self caulking drain (has a rubber caulking ring that tightens round the 2" waste pipe). When the shower base is in position the drain is ever so slightly off center and I can't get the rubber ring over the waste pipe. The drain is set in...

ABS Fiberglass Shower Drain Installation [ 1 Answers ]

Hi, I've read some great posts on the forums but still can't fully answer my hopefully simple question. I'm installing a fiberglass shower in my basement and picked up an ABS screw-in drain for it to connect to my abs drain pipe. The drain came with a rubber gasket, I'm wondering which side of...

Shower drain installation [ 2 Answers ]

Good morning, I am installing a shower floor pan with an integral drain. Should any lubricant be used to install the seal around the 2" drain pipe? Thank you, Jk

View more questions Search