Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Under cabinet lighting
[ 2 Answers ]
I am installing separate xenon lights of various lengths, typically 13", in 7 locations, each with its own transformer. 1st: Can these all be on one 15 amp circuit? 2nd: Wiring? I assume that I provide power to the switch and then daisy chain 14/2 wire to each fixture (daisy chain: one wire in...
Wiring under cabinet lighting
[ 3 Answers ]
I purchased 110V fluorescent lighting for mounting under our kitchen cabinets. The lights came with a plug. I read on a DIY website that it is fine to cut the plug off and wire directly to an outlet inside the wall. Is this true? If so, do I simply wire straight into the back of an outlet? And...
Under kitchen cabinet lighting
[ 1 Answers ]
I bought two sets of touch sensitive under cabinet kitchen light set put them in but one set keeps flashing then stops all together I've replaced the transformer and the touch switch but the wires in the six port connector, when you move the wires there the light go out two which one you touch ....
Kitchen cabinet lighting
[ 1 Answers ]
I've purchased hampton bay under cabinet lighting and the sets are limited to up to 200watts. If I have 2 sets can I splice the 3 setting dimmer switch to activate the 2 mutiple outlet strips? View more questions Search
|