Ask Experts Questions for FREE Help !
Ask
    2cowboys's Avatar
    2cowboys Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 25, 2009, 08:31 AM
    Furnace & AC won't work now
    Hi,
    We just bought a DW and furnace worker fine, now that we want the AC on, tried it and it doesn't work, checked wiring and found the two line (white & red) had been cut going from unit to under house, we bought more wire and spliced it put through tubing so it wouldn't get cut again, turned on breakers and now neither works.. heat or ac... replaced thermostat inside with a digital one and still no heat or ac. There is current going from unit to outside box with breaker in it. Anyone have any suggestions now? We really do want to get this working and can't afford a tech since my husband hasn't started work till tomorrow. Thanks for anyone that can help!
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    May 25, 2009, 08:37 AM

    What brand unit? Check for a blow fuse at your furnace control board.
    2cowboys's Avatar
    2cowboys Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 25, 2009, 08:45 AM
    Hi,
    It says Intertherm on the cover of the furnace door (never heard of this one before)
    I did open the bottom cover on furnace and it also had 2 breakers in there I flipped them off and then back on. Didn't see a fuse unless it is inside the big square metal box next to where the breakers are. I did take pictures of the wiring on the outside AC unit
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace do not work [ 1 Answers ]

My home ac/heat. The ac work but the furnace do not work. The system is a ge force air system. I changed the thermostat but when iturn it heat I get no sound at all.

Furnace will not work [ 1 Answers ]

I iwre the red and white together at the furnace and I still can get it to come on

Furnace won't work [ 2 Answers ]

My furnace won't work but the cental air does. The blower starts for the air but not the furnace. I replaced the igniter could it be the thermostat?

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

Fan Doesn't Work When Furnace On [ 3 Answers ]

If I have the furnace on and the fan on "Auto" the fan never comes on. The furnace seems to work fine - the ignitor begins to glow, gas comes on, and burners light. After a while the gas stops for a time (before coming back on) but the furnace seems to run continuously If I turn off my furnace...

View more questions Search