Ask Experts Questions for FREE Help !
Ask
    waderoberts's Avatar
    waderoberts Posts: 2, Reputation: 1
    New Member
     
    #1

    May 21, 2009, 04:25 PM
    2 years before window a.c. units trip circuit breakers?
    I have a 100-year-old house in Chicago, 3 floors, and given the economy and the length of the winters, I've held off on installing central A.C. I use one window unit to cool each floor. One is on a dedicated 15-amp circuits (nothing else is connected). I get about two years out of the units before they start to trip the circuit breakers (the second and the third, both on shared 15-amp circuits, are fine). I tried having a local repair company fix one unit; they replaced a part and the unit lasted a year before the same thing happened. I've tried units from 8,000 to 12,000 btus, all with a draw under 12 amps. The same thing keeps occurring. Should I treat these things as disposables after two years? I'm hot; unit worked fine last summer, andis now tripping breaker.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    May 21, 2009, 04:55 PM
    Could be the units are too small due to size of the area, or poor insulation, I will let the reefer experts size that for you. Either of these conditions will shorten a units life.

    Could be poor voltage also. Either too high or low. Should be in the 114 to 126 volt range, closer to 120 v the better.

    What exact part(s) was changed?
    waderoberts's Avatar
    waderoberts Posts: 2, Reputation: 1
    New Member
     
    #3

    May 21, 2009, 04:59 PM

    Hmm.. . I'm thinking trsnsformer? The repaired unit had something burned with oily residue.

    Thanks kindly,
    Wade
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #4

    May 21, 2009, 08:59 PM
    I have an idea,, buy a replacement from Lowe's ,with a 5 year warranty and trade it out every 2 years,, but you do need to have the voltage checked,also check how many amps the unit is pulling while running and check the label/tag to see what the unit should be pulling
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
     
    #5

    May 22, 2009, 05:37 AM

    Windows units generally last much longer than what you're experiencing. My gut reaction is to check your power quality, starting with voltage. If that checks out you may need to monitor your household voltage for longer periods. I would call your power company and discuss the situation with them if an electrician cannot find anything, they may be able to monitor your power quality.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Circuit breakers that trip [ 30 Answers ]

I recently purchased an indoor smokeless grill and am wondering if it is tripping my breaker. I thought when a breaker tripped, it went off only part way; not all the way off. I believe you have to turn a tripped breaker all the way off and then back on to get it to work again, which is why I am...

Central AC or Window Units [ 1 Answers ]

I live in a 1200 sq ft home in central Arizona. Temps are aprox 10 degree less (both summer and winter) than metro Phoenix, humidity low except July and August. House has ducts with central gas furnace and evap cooler, never had AC. Wanted to get AC for those 2 (July. August) humid months....

Circuit Breaker didn't Trip [ 7 Answers ]

I have a 1 year old home. The bathroom outlet is a GFCI outlet on a circuit protected by a 15 amp ARC FAULT BREAKER. Today my wife plugged her hair blowdryer and the base of the cord lit up like an arc welder. This lasted for 5-8 seconds before the cord completely melted and the fireworks...

GFI plugs on 220 window units [ 2 Answers ]

Why would the GFI plug on my 220 window unit trip?

GFI plugs on 220 window units [ 1 Answers ]

Why would the GFI plug on my 220 window unit trip?


View more questions Search