Ask Experts Questions for FREE Help !
Ask
    tewliz's Avatar
    tewliz Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 20, 2009, 06:20 PM
    Timer not advancing
    My husband installed an Intermatic T104 208-277V timer to our pool pump. However the clock on the timer is not advancing. Can anyone tell me what we might have done wrong. The manual for the timer is of no help.:)
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 20, 2009, 07:10 PM

    Power (Line) should be connected to terminals 1 and 3. The load (the pool pump) should be connected to terminals 2 and 4. You probably have those reversed.
    Attached Images
     
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    May 21, 2009, 05:52 AM

    An Electrician might verify power to timer motor terminals, You will see 2 small white wire coming in from behind timer, that is from motor, Verify it is 240 volt motor, and if 240 volts is present, you should be able to see 1 of the gears spin.
    You can buy just the timer motor, There is an old style and a new style at the least, bring the motor with you to electric supply house.
    Line or power needs to connect to terminals 1 and 3.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer Timer not advancing [ 10 Answers ]

I have an Electric Kenmore Dryer, model 110.86581100. My wife noticed the timer was not advancing the other day. Looking for a quick answer I went and purchased a new timer and installed it. To my frustration, the new one doesn't advance either... 90 bucks wasted there. OUCH. So I went into...

Noma, Woods, Westinghouse, and Stanley Timers Information [ 7 Answers ]

I've lost my instructions for the NOMA Christmas light timer (model N1506). Does anyone know how it works?

Repairing the timer dryer timer control [ 2 Answers ]

I have a maytag dryer, whose timer no longer works. The dryer will run constantly until you open the dryer. Is there a way to repair the timer and save on electricity?

Maytag Dryer - Timer not advancing in auto dry [ 1 Answers ]

I have a Maytag "export " model dryer, operates on 220V, not two 110V lines. Model MYE3350AGW, Serial 11070998GJ. My wife ran a load in auto dry mode while the exhaust cover outside had been painted shut. Now, the timer does not advance while in auto dry. Timer does advance when in timed dry...

View more questions Search