Ask Experts Questions for FREE Help !
Ask
    sassione's Avatar
    sassione Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 20, 2009, 10:44 AM
    MTD deck bearings
    I have an MTD 14.5/42 mower that I got at an auction. It has run great for the past 5 years but is having issues this year. I had a service guy look at it and he said the bearings have gone out on the spindles now. I don't know the model or serial number since they have worn off the decal and the only numbers left there are 1183A AC. How do I find the parts and would it be really difficult to just do it myself or do I have to let the shop have it for another couple of weeks until they finally get around to doing something with it?

    Thanks!
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    May 20, 2009, 10:56 AM

    Maybe mtd can do a partial number search.

    You can get the bearing number off the bearing and order one. I can find two company names if I look.

    You may need s press to put them in.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower deck belt routing John Deere 420 - 50inch deck [ 3 Answers ]

Hi - I am looking for help on the routing for deck belt for John Deere 420 with 50 inch deck. Any help would be appreciated. [email protected] Thank you ! Steve

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

Deck top. We have a covered deck, planning on expanding deck, a 2x4 crossed cover [ 1 Answers ]

help!! We are planning on expanding our original deck with an open 2x4 crossed cover... do you have pictures or construction help?? Thanks

Deck tables, tributary load, and beam size for deck [ 4 Answers ]

I am confused with "deck tables" from different sources, specifically concerning beam size for a deck. I am planning a basic deck as shown: 9677 Sources that describe the "tributary load" and "tributary length" would allow me to use as little as (1) 2x6 for the "front beam" (tributary...

Bearings [ 3 Answers ]

A boat is sailing on a course of 340T for a distance of 100km. It then makes a left turn of 10 degrees and travels for 50km Find the new bearing and find the distance of the boat from the home. :confused: :confused: :confused: Help lol

View more questions Search