Ask Experts Questions for FREE Help !
Ask
    dankb's Avatar
    dankb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 20, 2009, 02:49 AM
    Front Load Washer slides during spin cycle
    I need help! We puchased a Amana front load washer. We leveled the legs but during the spin cycle it slides acroos the floor. It is on tile. I was thinking of maybe putting a rubber mat under the washer to try to keep it still. Any suggestions would be appreciated!
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    May 20, 2009, 05:14 AM

    A rubber mat under the washer would be beneficial. You may want to check for off load before it starts spinning. You could also be putting too much in the washer at one time and the load becomes uneven. Is there a heavy duty cycle?

    Tick
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Front Load Washer Clunking Noise in Spin Cycle [ 5 Answers ]

We have had a Kenmore Elite front load washer for a number of years (Model 970-38712-00). Today it started making a clunking noise when it started the high speed spin cycle (similar to putting a pair of runners in the dryer). I took off the back and spun the pulley by hand and heard a clunk...

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

View more questions Search