Ask Experts Questions for FREE Help !
Ask
    pistolaz's Avatar
    pistolaz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2009, 11:34 PM
    Toyota Celica
    I have a 92 toyota celica gt. My rpm is going up n down
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    May 19, 2009, 04:51 AM

    I remember seeing a lot of them come in for MAP sensor problems causing this condition.
    It's mounted on the firewall. Try disconnecting it or try a donor part to see if it clears up. It's a very expensive little bugger.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Accelerator sticking on Toyota Celica [ 6 Answers ]

Ok... I've gotten some suggestions on this before... and after following the suggestions I have some new information that may help you help me. I have a 1990 Toyota Celica and the accelerator sticks when I first crank the car. I have cleaned the distributor cap and the butterfly. After doing...

1977 Toyota Celica GT liftback [ 4 Answers ]

Where to find 1977 Toyota Celica GT liftbacks that are for sale?

Toyota Celica Cruise Control [ 3 Answers ]

The problem I am having is the cruise control will not turn on. If you turn the wheel to the left with the cruise control switch facing up it will turn on, but when it is facing the right it will not turn on. Any suggestions, or ideas of what the part that controls this on the steering column is...

Toyota Celica Body Kit [ 5 Answers ]

I have a Toyota Celica 98 model, sixth generation of Celicas. I want to "pimp" my car and add a sporty looking body kit on. Does anyone know a manufacturer/seller of body kits. Any ideas are welcome. If you have a pimped out car please post your car's photo.

1990 toyota celica [ 1 Answers ]

Apparently they washed the motor and now the car won't start. I changed spark plugs, wires, cap & rotor. I have spark but I tested the injectors with the light tester and I have no signal on 2 cylinders. I'm not sure if maybe the distributor went bad. I also put some starting fluid in the breather....

View more questions Search