Ask Experts Questions for FREE Help !
Ask
    cocholate's Avatar
    cocholate Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 7, 2009, 07:32 PM
    Moped troubleshooting
    My son has a new moped, around 200 miles only. He turns it on, engine sounds fine, he pulls the throttle then it kills the engine, any ideas what the problem maybe?:(
    new2atc's Avatar
    new2atc Posts: 10, Reputation: 1
    New Member
    		  
    #2

    May 14, 2009, 10:51 PM
    Hey, and sorry if I am bringing up an old thread. Anyway it sounds like it could very well need a good carbuerator cleaning. Remove the carb. And then take the bowl off and take out the main and pilot jet. Clean the jets with a torch tip cleaner or the wire from a wire bread bag tie will work as well. Spray the jets and the carb with carb cleaner and reassemble. Hope this helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting. [ 2 Answers ]

I'm trying to trouble shoot an older computer I inherited. I am completely new to PCs. At any rate it has two problems that are possibly relateed. 1. The image the monitor (I have tried 2 different working monitors) has a bunch of red (sometimes grey) vertical lines across the screen which...

Second HD troubleshooting [ 1 Answers ]

Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ...

Moped [ 10 Answers ]

I no nothing of mechanics and my mopeds back brake is sticking. It won't release and so I can only drive 5-10mph. I don't want to have to drive my car to campus for gas reasons, so how do I fix it?

View more questions Search