Ask Experts Questions for FREE Help !
Ask
    csavage1's Avatar
    csavage1 Posts: 86, Reputation: 5
    Junior Member
    		  
    #1

    May 11, 2009, 07:00 PM
    I am looking for a low profile style softner.The area where this is going to be installed is only 44 inches high and I would love some input .Most models I have found are too high and it would be a problem filling and working on them. I thought Sears had one but I have yet to find any info. Any help would be greatly appreciated.Thanks

    I found some info on the Waterboss model and I would like to get another option if possible. Thanks in advance
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 12, 2009, 06:40 AM
    How low do you wish to go? How about some dimensions. Regards. Tom
    csavage1's Avatar
    csavage1 Posts: 86, Reputation: 5
    Junior Member
    		  
    #3

    May 12, 2009, 03:44 PM

    44 inches is the max height.We need at least 12 inches to add the salt and to service the unit.

    The model I have found is a Waterboss 120#
    *17,800, 4,684 grain settings
    12volt transformer included
    Holds 120 # of salt
    *70 grain max raw water hardness

    *23-1/2 x 14-1/2 x 19"
    *3/4" MHT inlet/outlet,FHT x MPT hoses included
    *3 yr warranty on all mechanical Parts 10yr on CAbinet and resin tank.

    This may be my only choice available. Thanks Speedball for your time.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #4

    May 12, 2009, 07:00 PM

    Home Depot and Lowe's carry Low Profile water softeners for about $450.00. They sell them in medium performance and high performance options. They are about 32" high.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sepit tank&watersoftner [ 3 Answers ]

If I run my watersoftner into my septic tank will this hurt my pipes or septic tank

Watersoftner installation - valve size? [ 11 Answers ]

So I have a new sears kenmore watersoftner to install. I was just forming my by-pass system when it struck me, did I buy the wrong valve for this job? Three valves, all the same.. I wonder this because when I look at the valve (a "mini ball valve") it is 1/2" on both ends which is good cause my...

Lowboy Hot Water Heater [ 1 Answers ]

Is there any store (Lowes, Home Depot, Sears, etc.) that sells lowboy hot water heaters (40-47 gal.) off the floor, in my area... Keansburg, NJ?

Lowboy - Fix or Replace? [ 12 Answers ]

I have a ranch style house with a crawl space built in the early '70s. It has bedrooms on one end and kitchen/laundry room on the other. The water heater was a gas 40 gallon lowboy in the crawl space beneath the bathrooms. It sits on dirt. We added on and upgraded the kitchen several years...

Where can I find a lowboy gas hot water heater? [ 3 Answers ]

I have a crawl space & currently have a US Craftmaster lowboy gas hot water heater that fits comfortably in that area. It was made in 1991 & want to replace it. I looked at their site & do not see any gas lowboy heaters for sale anymore. All they have is electric lowboys. I would like a 50 gallon...

View more questions Search